EMC QLogic Guide d'installation télécharger pdf (Page 141)

Configuring persistent binding for the Linux QLogic iSCSI HBA

141

Connecting to the Storage

4. Configure Target Parameters

5. Add A Target

6. Configure Target Authentication Menu

7. List LUN information

8. Save Target changes

9. Set Working Adapter

10. Refresh

11. Exit

enter selection:

3. Select the desired target ID to be unbound:

Target ID: 2 IP: 51.50.51.198 Port: 3260

ISCSI Name:

Alias:

State: No Connection

Target ID: 3 IP: 51.50.51.199 Port: 3260

ISCSI Name:

Alias:

State: No Connection

Target ID: 4 IP: 51.51.51.198 Port: 3260

ISCSI Name:

Alias:

State: Session Failed

Target ID: 5 IP: 51.51.51.199 Port: 3260

ISCSI Name:

Alias:

State: Session Failed

Target ID: 6 IP: 51.50.51.198 Port: 3260

ISCSI Name: iqn.1992-04.com.emc:cx.apm00033300794.a0

Alias: 0794.a0

State: Session Active

Enter a Target ID:

4. Select 11 to exit the menu.

Note: For information on reconfiguring devices, refer to “Device

reconfiguration procedures for the iSCSI 3.x driver” on page 196 or “Device

reconfiguration procedures for the iSCSI 5.x driver” on page 198.

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 215 216

Pas de commentaire

EMC QLogic Guide d'installation Page 141