EMC Qlogic QLA23xx Guide d'installation télécharger pdf (Page 32)

EMC Fibre Channel and iSCSI with QLogic Host Bus Adapters in the Windows Environment

Installation and Configuration

For example, Figure 13 shows that LUN 17 is masked to the HBA.

The LUN is available and is presented as "Supported" by the

BIOS.

Figure 13 Example of LUN 17 allocated to HBA

If no numbered entries appear in the above figure, verify the

following:

• For CLARiiON arrays, verify the single I/O path points to the

SP that owns the boot LUN.

• Verify array LUN masking settings are configured so this HBA

has visibility to the appropriate LUN. Refer to array software

documentation for details.

10. Select a supported LUN to use as the boot LUN (shown as LUN

17 in Figure 13) and press

Enter.

The Selectable Boot Settings dialog is displayed (Figure 14 on

page 33) with the updated array port and LUN number as the

boot device.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 127 128

Pas de commentaire

EMC Qlogic QLA23xx Guide d'installation Page 32