EMC QLogic Guide d'installation télécharger pdf (Page 46)

EMC Fibre Channel and iSCSI with QLogic Host Bus Adapters in the Windows Environment

Installation and Configuration

Figure 27 Driver handle numbers

11. Find the driver handle numbers that correspond to those listed

for the QLogic HBAs (as shown in Figure 27). Note the two digits

(proceeded by Ctrl, as shown in Figure 27) next to the driver

handles for the QLogic HBAs. These are control handles.

12. Determine the HBA instance that will be used for boot, and enter

the QLogic Fibre Channel Driver Configuration Utility by

typing drvcfg -s <driver handle> <control handle> (where

driver handle and control handle are the values that correspond

to the HBA instance to be used for boot. In this example, "

drvcfg

-s 5f 62

" is used.)

13. Press Enter.

The Fibre Channel Driver Configuration Utiliity menu will be

displayed (as shown in Figure 28 on page 45).

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 149 150

Pas de commentaire

EMC QLogic Guide d'installation Page 46