EMC Qlogic QLA22xx Guide d'installation télécharger pdf (Page 8)

Symmetrix Fibre Channel with Qlogic HBAs on Linux Hosts

Arbitrated Loop Configurations

13. Change the setting for LUNs per Target to 128. (The factory

setting is 8, but this must be changed to utilize all 128 LUNs

available from the Symmetrix.)

14. Select Enable LIP Full Login and press

ENTER to change the setting

to Yes.

15. Select Enable Target Reset and press ENTER to change the setting

to Yes.

16. Increase the setting for Port Down Retry Count to 32.

17. Press

ESC to return to the Configuration Settings menu.

18. On the Configuration Settings menu, select Extended Firmware

Settings.

19. Change the setting for Connection Options to 0 (Loop only).

20. Press

ESC to return to the Fast!Util Options menu.

21. When prompted to save the changes made to the current adapter,

select Save Changes.

22. If you have more adapters to configure, choose Select Host

Adapter and repeat steps 4 through 21 for each adapter.

23. Use the Fibre Disk utility to verify the disk media, as described

under Verifying the Disk Media on page 9.

24. Press

ESC to exit Fast!Util.

25. Reboot the host.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 75 76

Pas de commentaire

EMC Qlogic QLA22xx Guide d'installation Page 8