EMC Qlogic QLA22xx Guide d'installation télécharger pdf (Page 82)

4-8

EMC Fibre Channel with QLogic HBAs in the Windows Environment

Installing and Configuring the QLogic QLA4010 iSCSI HBA (TOE)

Configuring iSNS settings for QLA4010

For iSNS support, the QLA4010 must be running the correct driver

(see the EMC Support Matrix for latest version.)

Targets must register with the iSNS server. To register, enable the

iSNS server and enter the IP address using the SANsurfer GUI. Click

Save HBA under the Network dialog box in the GUI. The target

should be detected by SANsurfer in the Target Settings dialog. Click

SAVE Settings to bind the targets.

If the targets are not detected, follow these steps:

1. Ping successfully to the iSNS server using Diagnostics tab from

SANsurfer iSCSI HBA Manager window.

2. Go to iSNS server and iSNS server icon in the control panel or

desktop

3. Open Discovery Domain and confirm that both the QLA4010

and target ports are registered with the domain.

QLogic_Windows.book Page 8 Friday, May 27, 2005 3:53 PM

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 105 106

Pas de commentaire

EMC Qlogic QLA22xx Guide d'installation Page 82