EMC Qlogic QLA22xx Guide d'installation télécharger pdf (Page 49)

Configuring a CLARiiON Boot Device

3-13

Configuring an EMC Boot Device

Configuring a CLARiiON Boot Device

This section describes how to install a boot device onto an EMC

CLARiiON

storage system connected to an Intel-based x86 class

server. You can then boot Windows from the storage system.

This section assumes that EMC did not prepare the server or the

storage system to boot Windows from the storage system.

SCSI hard disks are allowed in configurations that boot over Fibre

Channel. However, the BIOS for a SCSI disk’s SCSI adapters must be

disabled. You should also disconnect any SCSI disks before installing

Windows.

Procedure Flowchart

The installation procedure includes steps you must follow in a

specific order. The following flowchart outlines the major steps.

QLogic_Windows.book Page 13 Friday, May 27, 2005 3:53 PM

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 105 106

Pas de commentaire

EMC Qlogic QLA22xx Guide d'installation Page 49